KISSlicer 1.6 Profiles

The following machine profiles have been submitted by KISSlicer users. They offer a quick starting point if you see your machine listed below. If not, please consider sending your machine profiles once you have you machine nicely tuned
Printer
Contributor
     Description
mhackney
  • updated 9/24/2017 - there was bad code in the g-code prefix
  • Printer, Style, Material and Support Profiles
  • uses new Preload feature for PETG
mhackney
  • updated 11/14/2017
  • Printer, Style, Material and Support Profiles
pjr
  • This is a link to Peter's FTP where he hosts the profile and Post-Processor
mhackney
  • basic Printer, Style, Material and Support Profiles
  • This is a first release, if you have any changes or recommendations contact me at michael.hackney@sublimelayers.com
Philippe
  • SpiderBot profiles, with 3.0 to release Sept 2017
  • Materials: ABS ARAMID NANOVIA, ABS CARBON NANOVIA, ABS CARBON-ARAMID NANOVIA, OWENS - PPGF30, PETG CARBON,PLA LIN, TAG PETHD, TAG TECHARMED,TAG TECHLINE